Short answer. Cumberland sets its sign rules in Part 5 of the Zoning Bylaw rather than a separate sign bylaw. Commercial properties are allowed up to two signs per parcel, and a development permit may be needed for signage in some development permit areas.
What needs a permit
- Signs on private property must meet Part 5 of the Zoning Bylaw.
- A development permit may be required for signage in some development permit areas, including the historic village core.
- Contact the Village before ordering a sign to confirm which approval applies.
Key rules
- Commercial and mixed-use zones: a maximum of two signs per parcel from the permitted types.
- Fascia signs: up to 0.5 m2 per linear metre of business frontage, projecting no more than 0.3 m from the wall, and at least 2.4 m clearance if projecting more than 77 mm.
- Awning signs: at least 2.4 m clearance above grade.
- Third party advertising is not permitted on any parcel or structure.
How to apply
- Contact the Village of Cumberland office about signage and any development permit requirement.
Lit signs and electrical approval
The Village of Cumberland sign permit covers size, placement and appearance. Electrical safety is a separate approval. In BC, the Electrical Safety Regulation does not allow electrical equipment to be used or sold unless it carries an accredited certification mark. For an electric sign the Canadian standard is CSA C22.2 No. 207, and the mark goes on the finished sign. The connection is made by a licensed electrician under an electrical permit. More in our guide to cUL certified signs.
Sources
This page summarizes official Village of Cumberland sources. Bylaws and fees change, so confirm with the municipality before you order or install a sign.